Search results for: '1500 prefer media data cable tray x 3 made'
- Related search terms
- cable adsl'nvOpzp; AND 1=1 OR (<'">iKO)),
- 1500 premium media data cable tray x 3 mode
- 1500 prefer media data cable tray x 3 metre
- Data/Data 10/100 Cat5e Economiser - must be used in pairs
- cables ti'nvOpzp; AND 1=1 OR (<'">iKO)),
-
- 42U high x 800mm wide x 600mm deep without side panels - Grey White - 542-4286-GSNF-GW£382.60Excel Environ CR800 Comms Rack 42U high x 800mm wide x 600mm deep without side panels - Grey White - 542-4286-GSNF-GW Learn More
- Cat3 RJ21 Telco Male to 24 x RJ45 plugs£34.00
- CAT3 RJ21 Male Telco Breakout to 24 RJ45 Plugs.
- pins 4 & 5
- UK manufactured and 100% tested
- Available with 90 degree, 120 degree and 180 degree hoods
- Other lengths can be manufactured to order
- Cat3 RJ21 Telco female to 24 x RJ45 plugs£34.00
- CAT3 RJ21 female Telco Breakout to 24 RJ45 Plugs.
- acative on pins 4 & 5.
- UK manufactured and 100% tested
- Available with 90 degree and 180 degree hoods
- Other lengths can be manufactured to order
- 6U HCF High Capacity Splicing And Patch Frame
The 6U HCF Splicing & Patch Frame is a high density rack mountable fiber management solution that splices and patches up to 864 fibers in a 6RU cabinet space. The 6U HCF has ribbon cabling splicing via a rear positioned hinge down panels that is supplied with a latching feature for both open and closed positions and shuttered Ultra High Density LC adapter modules on the front of the frame, allowing for smooth patching and easy LC port access.
Learn More - 40G QSFP+ (MPO) To 4x10G SFP+ (8xLC) Assembly
40G QSFP+ (MPO) To 4x10G SFP+ (8xLC) Assembly.
40G parallel optics transceivers (40GBASE-SR4) can support 4x10G modes– this feature allow new parallel optics active equipment being compatible with existing 10G transceivers. MPO QSFP+ to SFP+ Fan-out Assemblies provide connections between single QSFP+ (40G transceiver with MPO interface) and 4 x SFP+ (10G transceivers with LC(DX) Interface). Parallel optics 40GBASE-SR4 uses 8 out of 12 MPO interface fibers transmitting 4 x Duplex (DX) channels (4 x Transmit and 4 x Receive). QSFP+ to SFP+ Fanout is 8 x Fibers MPO to LC(DX) Ruggedized Fan-out assembly. Assembly utilizes new miniature version of breakout module saving fiber management space and providing secure transition between cable and tails.
See PDF Download For More Information.
Learn More - MPO MicroCable Fan-Out Assembly
MPO MicroCable Fan-Out Assembly.
MPO Fan-Out Assemblies interface multifiber MPO with discrete single fiber (LC/SC) connectors. Assemblies are typically used to directly interconnect MPO cassettes, panels or backbone trunk assemblies with the active equipment ports, saving costly data center rack space and easing fiber management. Replacing traditional MPO module Fan-Out Assemblies reduce amount of interconnection improving power budget cost effectiveness.
See PDF Download For More Information.
Learn More - Ultra High Density Module
Ultra High Density Modules are the platform for hosting pre-terminated cable assemblies. Solution brings advantage of speed installation, improved power budget as well as improved economics vs traditional modular MPO systems.Assemblies can be pre-installed inside modules in the factory and supplied to the installation site for instant deployment ready to operate. Alternatively if required pre-terminated cables can be fitted inside module post installation in the field.Variety of configuration is available intermixing “No plug, just play” modules with MPO trunks and modules, splice modules and variety of multifiber cable assemblies.
See PDF Download For More Information.
Learn More