Search results for: 'copper+straight+to'

Excel Internal/External Grade Loose Tube Fibre Cable 16 Core 9/125 OS2 P/NO 205-303 

• Can be cut to any length required, please call if you cannot see length required.

Excel Internal/External Grade Tight Buffered Fibre Cable 12 Core 9/125 OS1 P/No 205-324 

• Can be cut to any length required, please call if you cannot see length required.

CXP/CFP 100G MPO Cable Assembly.

CXP/CFP 100G MPO/MTP® cable assemblies are designed to make a connection between 2 CFP/CXP transceivers. They are built using 24 fiber ferrule MPO/MTP  connectors with custom fiber mapping polarity to provide connection between 100GBASE-SR10 CFP/CXP devices.

See PDF Download For More Information.

• PLEASE CALL FOR LENGTHS NOT SHOWN - WE CAN MANUFACTURE TO ANY LENGTH REQUIRED.

4 Core Pre Terminated Fibre OM4 Tight Buffered

• PLEASE CALL FOR LENGTHS NOT SHOWN - WE CAN MANUFACTURE TO ANY LENGTH REQUIRED.

8 Core Pre Terminated Fibre OM4 Tight Buffered

• PLEASE CALL FOR LENGTHS NOT SHOWN - WE CAN MANUFACTURE TO ANY LENGTH REQUIRED.

12 Core Pre Terminated Fibre OM4 Tight Buffered

• PLEASE CALL FOR LENGTHS NOT SHOWN - WE CAN MANUFACTURE TO ANY LENGTH REQUIRED

16 Core Pre Terminated Fibre OM4 Tight Buffered

• PLEASE CALL FOR LENGTHS NOT SHOWN - WE CAN MANUFACTURE TO ANY LENGTH REQUIRED.

24 Core Pre Terminated Fibre OM4 Tight Buffered

The 6U HCF Splicing & Patch Frame is a high density rack mountable fiber management solution that splices and patches up to 864 fibers in a 6RU cabinet space. The 6U HCF has ribbon cabling splicing via a rear positioned hinge down panels that is supplied with a latching feature for both open and closed positions and shuttered Ultra High Density LC adapter modules on the front of the frame, allowing for smooth patching and easy LC port access.

MPO/MTP Loop Back.

MPO/MTP Loopback are used widely within testing environment especially within parallel optics 40 and 100G networks. Devices allow verification and testing of transceivers featuring MPO/MTP interface - 40G BASED-SR4 QSFP+ or 100G BASE-SR10 CXP/CFP devices. Loopbacks are built to link Transceivers (TX) and Receivers (RX) positions of MPO/MTP transceivers interfaces. MPO/MTP loopbacks can facilitate and speed up IL testing of optical networks segments by connecting them to MPO/MTP trunks/patch leads.

See PDF Download For More Information.

MPO MicroCable Trunk Assembly.

MPO MicroCable Trunks facilitate rapid deployment of high density backbone cabling in data centers or other high fiber density environments reducing network installation or reconfiguration time and cost. They are used to interconnect cassettes, panels or ruggedised MPO Fan Outs, spanning MDA, HDA and EDA zones.

See PDF Download For More Information.

Ultra High Density Modules are the platform for hosting pre-terminated cable assemblies. Solution brings advantage of speed installation, improved power budget as well as improved economics vs traditional modular MPO systems.Assemblies can be pre-installed inside modules in the factory and supplied to the installation site for instant deployment ready to operate. Alternatively if required pre-terminated cables can be fitted inside module post installation in the field.Variety of configuration is available intermixing “No plug, just play” modules with MPO trunks and modules, splice modules and variety of multifiber cable assemblies.

See PDF Download For More Information.

Ultra High Density MPO/MTP Adaptor Module.

MPO/MTP adapter modules are used to interconnect MPO/MTP trunks, pigtails, patchcords or ruggedised MPO/MTP fanouts. MPO/MTP adapter interface reduces rack space usage.Substituting MPO/MTP module with adapter plate reduces amount of interconnections and improves power budget and network economics.

See PDF Download For More Information.

19” Rack Mounting. Front Fully populated with 24 RJ45 modules. RJ45 Pins active on 4 & 5. Male RJ21 Telco tail 90 degree hood, also available in 180 or 120 degree hood.Individual slide marking system RJ21 male Telco terminated directly on to the RJ45 Panel. Active on the voice pair of each socket (pins 4&5). Simply plug the RJ21 connector into your voice gateway to provide connectivity. Terminated RJ21 male telco can be manufactured to any cable length required. Can be used for Cisco Voice VG410 Gateway. All you need to do is fit the panel in the rack, simply plug the RJ21 connector's into your voice gateway and your connectivity is provided. The VG310 voice gateway will eventually be upgraded to the VG410 voice gateway by Cisco.