Search results for: 'telco connector'

HP ProCurve J9143B Compatible Gigabit Bi-Directional SFP Module

HP H3C / Comware JD098B Compatible Gigabit Bi-Directional SFP Module

HP H3C / Comware JD099B Compatible Gigabit Bi-Directional SFP Module

Planet Technology MGB-LA10 Compatible Gigabit Bi-Directional SFP Module

Planet Technology MGB-LB10 Compatible Gigabit Bi-Directional SFP Module

HP ProCurve J9142B Compatible Gigabit Bi-Directional SFP Module

• HP ProCurve Compatible
• SFP Form Factor
• Gigabit Speed
• 10km Transmission Distance 
• Downstream Bi-Directional
• 1490/1310nm Wavelength
• Simplex LC Connector

Enable bi-directional fibre optic transmission on your HP ProCurve brand switches, routers, security appliances and more using a single strand of fibre. The HP ProCurve J9142B Compatible Gigabit Bi-Di SFP Module by Advance is fully tested to ensure 100% compliance with all HP ProCurve switches, routers, appliances and devices that support J9142B modules. Fast plug-and-play operation, simply insert the Advance module into a spare SFP port and enjoy Gigabit speeds using a single strand of singlemode fibre.

40G QSFP+ 3:2 (MPO) Transition Assembly.

See PDF Download For More Information.

40G QSFP+ (MPO) To 4x10G SFP+ (8xLC) Assembly.

40G parallel optics transceivers (40GBASE-SR4) can support 4x10G modes– this feature allow new parallel optics active equipment being compatible with existing 10G transceivers. MPO QSFP+ to SFP+ Fan-out Assemblies provide connections between single QSFP+ (40G transceiver with MPO interface) and 4 x SFP+ (10G transceivers with LC(DX) Interface). Parallel optics 40GBASE-SR4 uses 8 out of 12 MPO interface fibers transmitting 4 x Duplex (DX) channels (4 x Transmit and 4 x Receive). QSFP+ to SFP+ Fanout is 8 x Fibers MPO to LC(DX) Ruggedized Fan-out assembly. Assembly utilizes new miniature version of breakout module saving fiber management space and providing secure transition between cable and tails.

See PDF Download For More Information.

The 6U HCF Splicing & Patch Frame is a high density rack mountable fiber management solution that splices and patches up to 864 fibers in a 6RU cabinet space. The 6U HCF has ribbon cabling splicing via a rear positioned hinge down panels that is supplied with a latching feature for both open and closed positions and shuttered Ultra High Density LC adapter modules on the front of the frame, allowing for smooth patching and easy LC port access.

• PLEASE CALL FOR LENGTHS NOT SHOWN - WE CAN MANUFACTURE TO ANY LENGTH REQUIRED.

4core 50/125 OM3 CST Pre Terminated Fibre Cable

• PLEASE CALL FOR LENGTHS NOT SHOWN - WE CAN MANUFACTURE TO ANY LENGTH REQUIRED.

8core 50/125 OM3 CST Pre Terminated Fibre Cable

MPO/MTP Loop Back.

MPO/MTP Loopback are used widely within testing environment especially within parallel optics 40 and 100G networks. Devices allow verification and testing of transceivers featuring MPO/MTP interface - 40G BASED-SR4 QSFP+ or 100G BASE-SR10 CXP/CFP devices. Loopbacks are built to link Transceivers (TX) and Receivers (RX) positions of MPO/MTP transceivers interfaces. MPO/MTP loopbacks can facilitate and speed up IL testing of optical networks segments by connecting them to MPO/MTP trunks/patch leads.

See PDF Download For More Information.