Search results for: '125 prefer media data cable tray x 3 metre'

• CAT3 RJ21 Male Telco Breakout to 24 RJ45 Plugs.
• pins 4 & 5
• UK manufactured and 100% tested
• Available with 90 degree, 120 degree and 180 degree hoods
• Other lengths can be manufactured to order

• CAT3 RJ21 female Telco Breakout to 24 RJ45 Plugs.
• acative on pins 4 & 5.
• UK manufactured and 100% tested
• Available with 90 degree and 180 degree hoods
• Other lengths can be manufactured to order

S07 1U Black Sliding Patch Panel - 12 Position SC duplex up to 24 fibers

Please see spec sheet for more information.

The 6U HCF Splicing & Patch Frame is a high density rack mountable fiber management solution that splices and patches up to 864 fibers in a 6RU cabinet space. The 6U HCF has ribbon cabling splicing via a rear positioned hinge down panels that is supplied with a latching feature for both open and closed positions and shuttered Ultra High Density LC adapter modules on the front of the frame, allowing for smooth patching and easy LC port access.

40G QSFP+ (MPO) To 4x10G SFP+ (8xLC) Assembly.

40G parallel optics transceivers (40GBASE-SR4) can support 4x10G modes– this feature allow new parallel optics active equipment being compatible with existing 10G transceivers. MPO QSFP+ to SFP+ Fan-out Assemblies provide connections between single QSFP+ (40G transceiver with MPO interface) and 4 x SFP+ (10G transceivers with LC(DX) Interface). Parallel optics 40GBASE-SR4 uses 8 out of 12 MPO interface fibers transmitting 4 x Duplex (DX) channels (4 x Transmit and 4 x Receive). QSFP+ to SFP+ Fanout is 8 x Fibers MPO to LC(DX) Ruggedized Fan-out assembly. Assembly utilizes new miniature version of breakout module saving fiber management space and providing secure transition between cable and tails.

See PDF Download For More Information.

MPO MicroCable Fan-Out Assembly.

MPO Fan-Out Assemblies interface multifiber MPO with discrete single fiber (LC/SC) connectors. Assemblies are typically used to directly interconnect MPO  cassettes, panels or backbone trunk assemblies with the active equipment ports, saving costly data center rack space and easing fiber management. Replacing traditional MPO  module Fan-Out Assemblies reduce amount of interconnection improving power budget cost effectiveness.   

See PDF Download For More Information.

CSB11 FTTH Customer Outlet SC Simplex / LC Duplex.

The internal customer outlet box is designed for use inside the home. The operator has the choice to have the box unloaded or equipped with adapters, the box is designed with integrated shutters to comply with safety standards.

CSB12 FTTH Customer Outlet SC Duplex / LC Quad.

The internal customer outlet box is designed for use inside the home. The operator has the choice to have the box unloaded or equipped with adapters, the box is designed with integrated shutters to comply with safety standards.

CXP/CFP 100G MPO Cable Assembly.

CXP/CFP 100G MPO/MTP® cable assemblies are designed to make a connection between 2 CFP/CXP transceivers. They are built using 24 fiber ferrule MPO/MTP  connectors with custom fiber mapping polarity to provide connection between 100GBASE-SR10 CFP/CXP devices.

See PDF Download For More Information.

40G QSFP+ (MPO) To QSFP+ Assembly.

See PDF Download For More Information.

•  PLEASE CALL FOR LENGTHS NOT SHOWN - WE CAN MANUFACTURE TO ANY LENGTH REQUIRED.

Cat6 UK Custom Made snagless booted LSZH ROLLOVER cable.