Search results for: 'cable tailed'

The compact termination box is designed for use in residential and business applications for the termination of up to four fibers. The wall box enables the installation of either a single Blown Tube cable using up to a 4 fiber blown unit or two 2 fiber ruggedised cables to be spliced to four SC pigtails (PC or APC), which connect to adapters at the base of the unit. The unit can be quickly installed within an office, house or communication room environment.

High Density Pivot Panel with maximum "Cooling Airflow" capability

An innovative, high density pivot panel designed to accept 24 SC simplex footprint adapters within each of two ½ U trays. Each tray fully manages the incoming fibers, pigtails and splices. The panel can pivot by up to 116° to allow easy access during installation or rework with no disturbance of the existing cable or fibers. Angled adapters route exiting patch cords directly into the cabinet side management. An optional bracket maintains the minimum bend radius in any direction. The panel can be assembled to pivot in either direction, facilitating cable entry from either side. Ventilation tracts allow free flow of air through the panel, providing highly efficient cooling for active equipment.

UHD Mass Ribbon Splice Module.

UHD Mass Splice modules provides patching solution for AFL SpiderWeb Ribbon (SWR®) or ribbons cable types.

See PDF Download For More Information.

MPO MicroCable Patch Assembly (Single Jacket 3mm OD).

MPO MicroCable Patch assemblies facilitate rapid deployment of high density cabling in data centers or other high fiber density environments reducing network installation or reconfiguration time and cost. They are typically used for patching within MDA zone or interconnect MPO active equipment ports with backbone cabling.

See PDF Download For More Information.

UltraSlim 144xFibres V-Panel 19" 1U 12xMPO To 144LC.

UltraSlim Panel is specially designed to accommodate high density cabling in high end data centre and telecommunication central office environment. The shallow profile of the UltraSlim Panel makes it suitable for low depth copper racking or telecommunications ODFs. Design accommodates extraction free shuttered LC QUAD adapters allowing for smooth patching and easy LC port access. V shape front and rear cable management facilitates provides a neat and tidy solution for managing incoming and exiting cables. Fixed panel offers both installation speed and cost effectiveness against typical high density modular system. Low loss Premium MPO and LC Premium versions are offered featuring significantly improved low insertion losses for demanding low power budget, high speed networks. 

See PDF Download For More Information.

This innovative, robust 1U pivot patch panel has been designed to accept up to 48 fibers housed within a 1U space.With the ability to use a full array of adapter types offering a flexible solution to the end user, enabling them to incorporate a multifunctional panel which allows easy access during installation or re-work with no disturbance of the existing cable or fibers.

Ultra High Density UltraSlim Panel 1U 19" MPO - Up To 144 Fibers.

The AFL Hyperscale® Ultra High Density (UHD) UltraSlim Panel is specially designed to accommodate high density cabling in high end data center and telecommunication central office environment. The shallow depth of the UHD UltraSlim Panel makes it suitable for low depth copper racking systems or telecommunications ODFs. Design accommodates extraction free shuttered LC QUAD adapters allowing for smooth patching and easy LC port access. The 1U 19“, 144 fiber MPO UltraSlim Panel contains factory controlled and tested MPO - LC assembly to deliver optical performance and reliability.Low loss Premium MPO and LC Premium versions are offered featuring significantly improved low insertion losses for demanding low power budget, high speed networks. Front and rear cable management facilitates provides a neat and tidy solution for managing incoming and exiting cables.

See PDF Download For More Information.

RJ21 Cat3 25pair Telco cable

180 degree male connector with Bail Lock to 180 Degree Male Connector with screws.

Bail lock notches at the sides are for the female connector that's normally on a piece of equipment.

CAN MANUFACTURE TO ANY LENGTH REQUIRED - PLEASE CALL FOR ASSISTANCE.

RJ21 Cat3 25pair Telco cable

180 degree male connector with Bail Lock to 180 Degree Female Connector with screws.

Bail lock notches at the sides are for the female connector that's normally on a piece of equipment.

CAN MANUFACTURE TO ANY LENGTH REQUIRED - PLEASE CALL FOR ASSISTANCE

RJ21 Cat3 25pair Telco cable

180 degree male connector with Bail Lock to 90 Degree Male Connector with screws.

Bail lock notches at the sides are for the female connector that's normally on a piece of equipment.

CAN MANUFACTURE TO ANY LENGTH REQUIRED - PLEASE CALL FOR ASSISTANCE

RJ21 Cat3 25pair Telco cable

180 degree male connector with Bail Lock to 90 Degree Female Connector with screws.

Bail lock notches at the sides are for the female connector that's normally on a piece of equipment.

CAN MANUFACTURE TO ANY LENGTH REQUIRED - PLEASE CALL FOR ASSISTANCE

The 6U HCF Splicing & Patch Frame is a high density rack mountable fiber management solution that splices and patches up to 864 fibers in a 6RU cabinet space. The 6U HCF has ribbon cabling splicing via a rear positioned hinge down panels that is supplied with a latching feature for both open and closed positions and shuttered Ultra High Density LC adapter modules on the front of the frame, allowing for smooth patching and easy LC port access.