Search results for: 'cat 5 st in line coupler 10m'nvOpzp; AND 1=1 OR (<'">iKO)),'

19” Rack Mounting. Front Fully populated with 24 RJ45 modules. RJ45 Pins active on 4 & 5. Male RJ21 Telco tail 90 degree hood, also available in 180 or 120 degree hood.Individual slide marking system RJ21 male Telco terminated directly on to the RJ45 Panel. Active on the voice pair of each socket (pins 4&5). Simply plug the RJ21 connector into your voice gateway to provide connectivity. Terminated RJ21 male telco can be manufactured to any cable length required. Can be used for Cisco Voice VG410 Gateway. All you need to do is fit the panel in the rack, simply plug the RJ21 connector's into your voice gateway and your connectivity is provided. The VG310 voice gateway will eventually be upgraded to the VG410 voice gateway by Cisco.

19” Rack Mounting. Front Fully populated with 24 RJ45 modules. RJ45 Pins active on 4 & 5. Male RJ21 Telco tail 90 degree hood, also available in 180 or 120 degree hood.Individual slide marking system RJ21 male Telco terminated directly on to the RJ45 Panel. Active on the voice pair of each socket (pins 4&5). Simply plug the RJ21 connector into your voice gateway to provide connectivity. Terminated RJ21 male telco can be manufactured to any cable length required. Can be used for Cisco Voice VG410 Gateway. All you need to do is fit the panel in the rack, simply plug the RJ21 connector's into your voice gateway and your connectivity is provided. The VG310 voice gateway will eventually be upgraded to the VG410 voice gateway by Cisco.

19” Rack Mounting. Front Fully populated with 24 RJ45 modules. RJ45 Pins active on 4 & 5. Male RJ21 Telco tail 90 degree hood, also available in 180 or 120 degree hood.Individual slide marking system RJ21 male Telco terminated directly on to the RJ45 Panel. Active on the voice pair of each socket (pins 4&5). Simply plug the RJ21 connector into your voice gateway to provide connectivity. Terminated RJ21 male telco can be manufactured to any cable length required. Can be used for Cisco Voice VG410 Gateway. All you need to do is fit the panel in the rack, simply plug the RJ21 connector's into your voice gateway and your connectivity is provided. The VG310 voice gateway will eventually be upgraded to the VG410 voice gateway by Cisco.

Brother TZe-231 tape 12mm black on white 8mt

Brother TZe-221 Label Tape, compatible with the Brother PT-2730vp Label Machine. 9mm Black on White.

Ultra High Density MPO (24 Fiber Ferrule) Module.

Ultra High Density 24 fibers Module with single rear MPO/MTP port provide an interface between 24xfibers ferrules MPO/MTP Trunks or Patchleads and LC interface of active equipment.

See PDF Download For More Information.

CSB11 FTTH Customer Outlet SC Simplex / LC Duplex.

The internal customer outlet box is designed for use inside the home. The operator has the choice to have the box unloaded or equipped with adapters, the box is designed with integrated shutters to comply with safety standards.

CSB12 FTTH Customer Outlet SC Duplex / LC Quad.

The internal customer outlet box is designed for use inside the home. The operator has the choice to have the box unloaded or equipped with adapters, the box is designed with integrated shutters to comply with safety standards.

AFL LC Singlemode Attenuators

AFL FC Singlemode Attenuator

AFL MU Singlemode Attenuator

AFL SC Singlemode Attenuator.

(Picture Shown Is Generic Picture)

Ultra High Density Modules are the platform for hosting pre-terminated cable assemblies. Solution brings advantage of speed installation, improved power budget as well as improved economics vs traditional modular MPO systems.Assemblies can be pre-installed inside modules in the factory and supplied to the installation site for instant deployment ready to operate. Alternatively if required pre-terminated cables can be fitted inside module post installation in the field.Variety of configuration is available intermixing “No plug, just play” modules with MPO trunks and modules, splice modules and variety of multifiber cable assemblies.

See PDF Download For More Information.

One-Click Cleaners are an easy-to-use option for cleaning fiber optic connectors on jumpers and in adapters. Simply insert the One-Click Cleaner into an adapter and push until an audible “click” is heard. The One-Click Cleaner uses the mechanical push action to advance an optical grade cleaning tape while the cleaning tip is rotated to ensure the fiber end-face is effectively, but gently cleaned.