Search results for: 'Male - Female 6 Core Telephone Extension Cable'

Ultra High Density Modules are the platform for hosting pre-terminated cable assemblies. Solution brings advantage of speed installation, improved power budget as well as improved economics vs traditional modular MPO systems.Assemblies can be pre-installed inside modules in the factory and supplied to the installation site for instant deployment ready to operate. Alternatively if required pre-terminated cables can be fitted inside module post installation in the field.Variety of configuration is available intermixing “No plug, just play” modules with MPO trunks and modules, splice modules and variety of multifiber cable assemblies.

See PDF Download For More Information.

This innovative, high density pivot panel is designed to accept 24 SC simplex footprint adapters within each of the four ½ U trays. Each tray fully manages the incoming fibers, pigtails and splices.The panel can pivot by up to 120° to allow easy access during installation or rework with no disturbance of the existing cable or fibers. Angled adapters route exiting patchcords directly into the cabinet side management.An optional bracket maintains the minimum bend radius in any direction. The panel can be assembled to pivot in either direction, facilitating cable entry from either side. Ventilation tracts allow free flow of air through the panel, providing highly efficient cooling for active equipment.

IP rated external termination box.

The termination box is designed for use on the external wall of residential or small business premises. The unit houses a single splice tray and allows fibers from externally fed cables (Blown Fiber or conventional), to be spliced to pigtails for connection to the optical network unit. Pigtail fibers or patch cords are routed through the external wall fabric via a rear entry/exit position and are protected by 25mm diameter conduit. The unit can also be used as a transition point between internal and external cable.

The compact termination box is designed for use in residential and business applications for the termination of up to four fibers. The wall box enables the installation of either a single Blown Tube cable using up to a 4 fiber blown unit or two 2 fiber ruggedised cables to be spliced to four SC pigtails (PC or APC), which connect to adapters at the base of the unit. The unit can be quickly installed within an office, house or communication room environment.

High Density Pivot Panel with maximum "Cooling Airflow" capability

An innovative, high density pivot panel designed to accept 24 SC simplex footprint adapters within each of two ½ U trays. Each tray fully manages the incoming fibers, pigtails and splices. The panel can pivot by up to 116° to allow easy access during installation or rework with no disturbance of the existing cable or fibers. Angled adapters route exiting patch cords directly into the cabinet side management. An optional bracket maintains the minimum bend radius in any direction. The panel can be assembled to pivot in either direction, facilitating cable entry from either side. Ventilation tracts allow free flow of air through the panel, providing highly efficient cooling for active equipment.

UHD Mass Ribbon Splice Module.

UHD Mass Splice modules provides patching solution for AFL SpiderWeb Ribbon (SWR®) or ribbons cable types.

See PDF Download For More Information.

UltraSlim 144xFibres V-Panel 19" 1U 12xMPO To 144LC.

UltraSlim Panel is specially designed to accommodate high density cabling in high end data centre and telecommunication central office environment. The shallow profile of the UltraSlim Panel makes it suitable for low depth copper racking or telecommunications ODFs. Design accommodates extraction free shuttered LC QUAD adapters allowing for smooth patching and easy LC port access. V shape front and rear cable management facilitates provides a neat and tidy solution for managing incoming and exiting cables. Fixed panel offers both installation speed and cost effectiveness against typical high density modular system. Low loss Premium MPO and LC Premium versions are offered featuring significantly improved low insertion losses for demanding low power budget, high speed networks. 

See PDF Download For More Information.

This innovative, robust 1U pivot patch panel has been designed to accept up to 48 fibers housed within a 1U space.With the ability to use a full array of adapter types offering a flexible solution to the end user, enabling them to incorporate a multifunctional panel which allows easy access during installation or re-work with no disturbance of the existing cable or fibers.

Ultra High Density UltraSlim Panel 1U 19" MPO - Up To 144 Fibers.

The AFL Hyperscale® Ultra High Density (UHD) UltraSlim Panel is specially designed to accommodate high density cabling in high end data center and telecommunication central office environment. The shallow depth of the UHD UltraSlim Panel makes it suitable for low depth copper racking systems or telecommunications ODFs. Design accommodates extraction free shuttered LC QUAD adapters allowing for smooth patching and easy LC port access. The 1U 19“, 144 fiber MPO UltraSlim Panel contains factory controlled and tested MPO - LC assembly to deliver optical performance and reliability.Low loss Premium MPO and LC Premium versions are offered featuring significantly improved low insertion losses for demanding low power budget, high speed networks. Front and rear cable management facilitates provides a neat and tidy solution for managing incoming and exiting cables.

See PDF Download For More Information.

UltraSlim Base-8 96xFibres Transition V-Panel 1U 19" 12xMPO To 144LC.

UltraSlim Base-8 Transition panel is designed to allow connection of Base-8 100/40G (MPO) with lower speeds 25/10G interfaces (LC DX). Fixed panel offers both installation speed and cost effectiveness against typical high density modular system. The shallow depth of UltraSlim profile is unique making it suitable for low depth cabinet or racking systems. V shape profiled front together with cable management accessories facilitates managing front and rear cabling.  Low loss MPO and LC Premium terminations are offered featuring significantly improved low insertion losses for demanding low power budget, high speed networks. 

See PDF Download For More Information.

UltraSlim Base-8 144xFibres Transition V-Panel 1U 19" 18xMPO To 144LC.

UltraSlim Base-8 Transition panel is designed to allow connection of Base-8 100/40G (MPO) with lower speeds 25/10G interfaces (LC DX). High density design offers optimal space management with extraction tool free finger access to LC ports.Fixed panel offers both installation speed and cost effectiveness against legacy high density modular system. The shallow depth of UltraSlim profile is unique making it suitable for low depth cabinet or racking systems. V shape profiled front together with cable management accessories facilitates managing front and rear cabling. Low loss MPO and LC Premium terminations are offered featuring significantly improved low insertion losses for demanding low power budget, high speed networks. 

See PDF Download For More Information.

Ultra High Density Copper Module.

UHD (Ultra High Density) Copper Module compliments UHD system allowing for copper links to co-exist in common with fiber optics oriented high density management. Copper module if fully compatible with 0U, 1U and 2U UHD chassis system and 2U Patching frame accepting up to 5 modules in 1U and up to 12 x modules in 2U space. Standard module comes with 4 x Category 6A screened tool free RJ-45 keystone jacks for on-site cable termination. Module can be used as a platform to install factory made copper preterm assemblies.   

See PDF Download For More Information.