Search results for: '180 black cable'

Cca MPO MicroCable Patch Assembly (Single Jacket 3mm OD).

MPO patch cable assemblies built using Cca compliant cable to address current CPR EU regulations, local standards or local guidances. Selecting Cca Euroclass cable provides assurance that premium product is selected for areas of high risk to people (escape routes, hospitals, public buildings). Assemblies are offered with selection of multifibre (MPO) and single fibre (SF- LC, SC) terminations.    

See PDF Download For More Information.

Advance Active Gigabit 10km Singlemode Duplex SC Media Converter

HOW IT WORKS (SEE PICTURE)

Ultra High Density Modules are the platform for hosting pre-terminated cable assemblies. Solution brings advantage of speed installation, improved power budget as well as improved economics vs traditional modular MPO systems.Assemblies can be pre-installed inside modules in the factory and supplied to the installation site for instant deployment ready to operate. Alternatively if required pre-terminated cables can be fitted inside module post installation in the field.Variety of configuration is available intermixing “No plug, just play” modules with MPO trunks and modules, splice modules and variety of multifiber cable assemblies.

See PDF Download For More Information.

This innovative, high density pivot panel is designed to accept 24 SC simplex footprint adapters within each of the four ½ U trays. Each tray fully manages the incoming fibers, pigtails and splices.The panel can pivot by up to 120° to allow easy access during installation or rework with no disturbance of the existing cable or fibers. Angled adapters route exiting patchcords directly into the cabinet side management.An optional bracket maintains the minimum bend radius in any direction. The panel can be assembled to pivot in either direction, facilitating cable entry from either side. Ventilation tracts allow free flow of air through the panel, providing highly efficient cooling for active equipment.

IP rated external termination box.

The termination box is designed for use on the external wall of residential or small business premises. The unit houses a single splice tray and allows fibers from externally fed cables (Blown Fiber or conventional), to be spliced to pigtails for connection to the optical network unit. Pigtail fibers or patch cords are routed through the external wall fabric via a rear entry/exit position and are protected by 25mm diameter conduit. The unit can also be used as a transition point between internal and external cable.

The compact termination box is designed for use in residential and business applications for the termination of up to four fibers. The wall box enables the installation of either a single Blown Tube cable using up to a 4 fiber blown unit or two 2 fiber ruggedised cables to be spliced to four SC pigtails (PC or APC), which connect to adapters at the base of the unit. The unit can be quickly installed within an office, house or communication room environment.

MPO Loose Tube Trunk.

LooseTube Cable Assemblies  utilize the patented AFL Hyperscale® transition module and guarantees superior tensile strength and crushing resistance. The high density design can scale from 2 up to 144 fibers and can feature both 900 µm and ruggedised 2 mm tail leads. Assemblies can comprise of both multifiber MPO and discrete connectors, making the cable a flexible hybrid solution for diverse applications.

See PDF Download For More Information.

High Density Pivot Panel with maximum "Cooling Airflow" capability

An innovative, high density pivot panel designed to accept 24 SC simplex footprint adapters within each of two ½ U trays. Each tray fully manages the incoming fibers, pigtails and splices. The panel can pivot by up to 116° to allow easy access during installation or rework with no disturbance of the existing cable or fibers. Angled adapters route exiting patch cords directly into the cabinet side management. An optional bracket maintains the minimum bend radius in any direction. The panel can be assembled to pivot in either direction, facilitating cable entry from either side. Ventilation tracts allow free flow of air through the panel, providing highly efficient cooling for active equipment.

UHD Mass Ribbon Splice Module.

UHD Mass Splice modules provides patching solution for AFL SpiderWeb Ribbon (SWR®) or ribbons cable types.

See PDF Download For More Information.

MPO MicroCable Patch Assembly (Single Jacket 3mm OD).

MPO MicroCable Patch assemblies facilitate rapid deployment of high density cabling in data centers or other high fiber density environments reducing network installation or reconfiguration time and cost. They are typically used for patching within MDA zone or interconnect MPO active equipment ports with backbone cabling.

See PDF Download For More Information.

UltraSlim 144xFibres V-Panel 19" 1U 12xMPO To 144LC.

UltraSlim Panel is specially designed to accommodate high density cabling in high end data centre and telecommunication central office environment. The shallow profile of the UltraSlim Panel makes it suitable for low depth copper racking or telecommunications ODFs. Design accommodates extraction free shuttered LC QUAD adapters allowing for smooth patching and easy LC port access. V shape front and rear cable management facilitates provides a neat and tidy solution for managing incoming and exiting cables. Fixed panel offers both installation speed and cost effectiveness against typical high density modular system. Low loss Premium MPO and LC Premium versions are offered featuring significantly improved low insertion losses for demanding low power budget, high speed networks. 

See PDF Download For More Information.

This innovative, robust 1U pivot patch panel has been designed to accept up to 48 fibers housed within a 1U space.With the ability to use a full array of adapter types offering a flexible solution to the end user, enabling them to incorporate a multifunctional panel which allows easy access during installation or re-work with no disturbance of the existing cable or fibers.

Ultra High Density UltraSlim Panel 1U 19" MPO - Up To 144 Fibers.

The AFL Hyperscale® Ultra High Density (UHD) UltraSlim Panel is specially designed to accommodate high density cabling in high end data center and telecommunication central office environment. The shallow depth of the UHD UltraSlim Panel makes it suitable for low depth copper racking systems or telecommunications ODFs. Design accommodates extraction free shuttered LC QUAD adapters allowing for smooth patching and easy LC port access. The 1U 19“, 144 fiber MPO UltraSlim Panel contains factory controlled and tested MPO - LC assembly to deliver optical performance and reliability.Low loss Premium MPO and LC Premium versions are offered featuring significantly improved low insertion losses for demanding low power budget, high speed networks. Front and rear cable management facilitates provides a neat and tidy solution for managing incoming and exiting cables.

See PDF Download For More Information.