Search results for: 'Cat6a UK Custom Made snagless booted patch lead - Blue.'

• CAT3 RJ21 Female Telco to 24 RJ11 Plugs.
• UK manufactured and 100% tested
• Available with 90 degree, 120 degree and 180 degree hoods
• Other lengths can be manufactured to order

• CAT3 RJ21 Female Telco - 3 x 237a krone strips.
• UK manufactured and 100% tested
• Available with 90 degree, 120 degree and 180 degree hoods
• Other lengths can be manufactured to order

• CAT3 RJ21 Male Telco Breakout to 24 RJ11 Plugs.
• UK manufactured and 100% tested
• Available with 90 degree, 120 degree and 180 degree hoods
• Other lengths can be manufactured to order

• CAT3 RJ21 Male Telco to 3 x 237a krone strips.
• UK manufactured and 100% tested
• Available with 90 degree, 120 degree and 180 degree hoods
• Other lengths can be manufactured to order

Ultra High Density Modules are the platform for hosting pre-terminated cable assemblies. Solution brings advantage of speed installation, improved power budget as well as improved economics vs traditional modular MPO systems.Assemblies can be pre-installed inside modules in the factory and supplied to the installation site for instant deployment ready to operate. Alternatively if required pre-terminated cables can be fitted inside module post installation in the field.Variety of configuration is available intermixing “No plug, just play” modules with MPO trunks and modules, splice modules and variety of multifiber cable assemblies.

See PDF Download For More Information.

• Cat3 RJ21 Male Telco - 24 RJ11 ruggerdized tails.
• Each RJ11 leg are individually sleeved for extra protection.
• UK manufactured and 100% tested
• Available with 90 degree, 120 degree and 180 degree hoods
• Other lengths can be manufactured to order

UltraSlim Panel 1U 19" MPO - Up To 96 Fibers.

The UltraSlim Panels provide secure transitions between MPO and LC or SC discrete connector interfaces. They are used to interface MPO  backbones with LC or SC patching and active equipment connections.

See PDF Download For More Information.

40G QSFP+ (MPO) To 4x10G SFP+ (8xLC) Assembly.

40G parallel optics transceivers (40GBASE-SR4) can support 4x10G modes– this feature allow new parallel optics active equipment being compatible with existing 10G transceivers. MPO QSFP+ to SFP+ Fan-out Assemblies provide connections between single QSFP+ (40G transceiver with MPO interface) and 4 x SFP+ (10G transceivers with LC(DX) Interface). Parallel optics 40GBASE-SR4 uses 8 out of 12 MPO interface fibers transmitting 4 x Duplex (DX) channels (4 x Transmit and 4 x Receive). QSFP+ to SFP+ Fanout is 8 x Fibers MPO to LC(DX) Ruggedized Fan-out assembly. Assembly utilizes new miniature version of breakout module saving fiber management space and providing secure transition between cable and tails.

See PDF Download For More Information.

High Density Pivot Panel with maximum "Cooling Airflow" capability

An innovative, high density pivot panel designed to accept 24 SC simplex footprint adapters within each of two ½ U trays. Each tray fully manages the incoming fibers, pigtails and splices. The panel can pivot by up to 116° to allow easy access during installation or rework with no disturbance of the existing cable or fibers. Angled adapters route exiting patch cords directly into the cabinet side management. An optional bracket maintains the minimum bend radius in any direction. The panel can be assembled to pivot in either direction, facilitating cable entry from either side. Ventilation tracts allow free flow of air through the panel, providing highly efficient cooling for active equipment.

MPO MicroCable Fan-Out Assembly.

MPO Fan-Out Assemblies interface multifiber MPO with discrete single fiber (LC/SC) connectors. Assemblies are typically used to directly interconnect MPO  cassettes, panels or backbone trunk assemblies with the active equipment ports, saving costly data center rack space and easing fiber management. Replacing traditional MPO  module Fan-Out Assemblies reduce amount of interconnection improving power budget cost effectiveness.   

See PDF Download For More Information.

The FCP2 Fiber Cleaning Kit for SC/ST/FC/LC offers a complete selection of optical cleaning products for field cleaning of connector end-faces in a convenient duffle bag style carry case. It includes 1 x FCC2 cleaning fluid, 1 x FiberWipes , 1 x Cletop-SB, 1 x One-Click  Cleaner SC/ST/FC and 1 x One-Click  Cleaner MU/LC.

The FCP2 Fiber Cleaning Kit for SC/ST/FC/LC/MPO offers a complete selection of optical cleaning products for field cleaning of connector end-faces in a convenient duffle bag style carry case. It includes 1 x FCC2 cleaning fluid, 1 x FiberWipes , 1 x Cletop-SB, 1 x One-Click  Cleaner SC/ST/FC, 1 x One-Click  Cleaner MU/LC and 1 x One-Click  Cleaner MPO .

The compact termination box is designed for use in residential and business applications for the termination of up to four fibers. The wall box enables the installation of either a single Blown Tube cable using up to a 4 fiber blown unit or two 2 fiber ruggedised cables to be spliced to four SC pigtails (PC or APC), which connect to adapters at the base of the unit. The unit can be quickly installed within an office, house or communication room environment.

HP ProCurve J9142B Compatible Gigabit Bi-Directional SFP Module

• HP ProCurve Compatible
• SFP Form Factor
• Gigabit Speed
• 10km Transmission Distance 
• Downstream Bi-Directional
• 1490/1310nm Wavelength
• Simplex LC Connector

Enable bi-directional fibre optic transmission on your HP ProCurve brand switches, routers, security appliances and more using a single strand of fibre. The HP ProCurve J9142B Compatible Gigabit Bi-Di SFP Module by Advance is fully tested to ensure 100% compliance with all HP ProCurve switches, routers, appliances and devices that support J9142B modules. Fast plug-and-play operation, simply insert the Advance module into a spare SFP port and enjoy Gigabit speeds using a single strand of singlemode fibre.