Search results for: 'premium svga male to mode'

19” Rack Mounting. Front Fully populated with 24 RJ45 modules. RJ45 Pins active on 4 & 5. Male RJ21 Telco tail 90 degree hood, also available in 180 or 120 degree hood.Individual slide marking system RJ21 male Telco terminated directly on to the RJ45 Panel. Active on the voice pair of each socket (pins 4&5). Simply plug the RJ21 connector into your voice gateway to provide connectivity. Terminated RJ21 male telco can be manufactured to any cable length required. Can be used for Cisco Voice VG410 Gateway. All you need to do is fit the panel in the rack, simply plug the RJ21 connector's into your voice gateway and your connectivity is provided. The VG310 voice gateway will eventually be upgraded to the VG410 voice gateway by Cisco.

Learn More

19” Rack Mounting. Front Fully populated with 24 RJ45 modules. RJ45 Pins active on 4 & 5. Male RJ21 Telco tail 90 degree hood, also available in 180 or 120 degree hood.Individual slide marking system RJ21 male Telco terminated directly on to the RJ45 Panel. Active on the voice pair of each socket (pins 4&5). Simply plug the RJ21 connector into your voice gateway to provide connectivity. Terminated RJ21 male telco can be manufactured to any cable length required. Can be used for Cisco Voice VG410 Gateway. All you need to do is fit the panel in the rack, simply plug the RJ21 connector's into your voice gateway and your connectivity is provided. The VG310 voice gateway will eventually be upgraded to the VG410 voice gateway by Cisco.

Learn More

40G QSFP+ (MPO) To 4x10G SFP+ (8xLC) Assembly.

40G parallel optics transceivers (40GBASE-SR4) can support 4x10G modes– this feature allow new parallel optics active equipment being compatible with existing 10G transceivers. MPO QSFP+ to SFP+ Fan-out Assemblies provide connections between single QSFP+ (40G transceiver with MPO interface) and 4 x SFP+ (10G transceivers with LC(DX) Interface). Parallel optics 40GBASE-SR4 uses 8 out of 12 MPO interface fibers transmitting 4 x Duplex (DX) channels (4 x Transmit and 4 x Receive). QSFP+ to SFP+ Fanout is 8 x Fibers MPO to LC(DX) Ruggedized Fan-out assembly. Assembly utilizes new miniature version of breakout module saving fiber management space and providing secure transition between cable and tails.

See PDF Download For More Information.

Learn More

3x40G QSFP+ (MPO) To 12x10G SFP+ (8xLC) Transition Module.

40G parallel optics transceivers like QSFP+ can support 4x10G modes– this feature allows new parallel optics active equipment being compatible with existing 10G transceivers.3x40G QSFP+ (MPO) to 12x10G SFP+ (8xLC) Transition Module provides interface between 3xQSFP+ (40G transceiver with MPO interface) and 12xSFP+ devices (10G transceivers with LC(DX) Interface).Transition modules introduce convenient patching position facilitating potential adds, changes or reconfigurations to installed cabling and is a perfect alternative to fixed equipment to equipment connections provided by QSFP+ to SFP+ Fan-out Assemblies. Single 3x40G QSFP+ (MPO) to 12x10G SFP+ (8xLC) Transition Module provides a transition function of 3xQSFP+ to SFP+ Fan-out Assemblies.

See PDF Download For More Information.

Learn More

2x40G QSFP+ (MPO) To 8x10G SFP+ (16xLC) Transition Module.

40G parallel optics transceivers like QSFP+ can support 4x10G modes– this feature allows new parallel optics active equipment being compatible with existing 10G transceivers.2x40G QSFP+ (MPO/MTP®) to 8x10G SFP+ (16xLC) Transition Module provides interface between 2xQSFP+ (40G transceiver with MPO/MTP® interface) and 8xSFP+ devices (10G transceivers with LC(DX) Interface).Transition modules introduce convenient patching position facilitating potential adds, changes or reconfigurations to installed cabling and is a perfect alternative to fixed equipment to equipment connections provided by QSFP+ to SFP+ Fan-out Assemblies. Single 2x40G QSFP+ (MPO/MTP®) to 8x10G SFP+ (16xLC) Transition Module provides a transition function of 2xQSFP+ to SFP+ Fan-out Assemblies. All optical ports are positioned in front of UHD modules providing convenient front access.

See PDF Download For More Information.

Learn More

40G QSFP+ (MPO) To QSFP+ Assembly.

See PDF Download For More Information.

Learn More

MPO MicroCable Fan-Out Assembly.

MPO Fan-Out Assemblies interface multifiber MPO with discrete single fiber (LC/SC) connectors. Assemblies are typically used to directly interconnect MPO  cassettes, panels or backbone trunk assemblies with the active equipment ports, saving costly data center rack space and easing fiber management. Replacing traditional MPO  module Fan-Out Assemblies reduce amount of interconnection improving power budget cost effectiveness.   

See PDF Download For More Information.

Learn More

Planet 10/100/1000 Base-T to 1000 Base-SX SC Multimode (GT-802UK) Learn More

Planet 10/100/1000 Base-T to 1000 Base-LX SC Singlemode (GT-802SUK) Learn More

MPO MicroCable Trunk Assembly.

MPO MicroCable Trunks facilitate rapid deployment of high density backbone cabling in data centers or other high fiber density environments reducing network installation or reconfiguration time and cost. They are used to interconnect cassettes, panels or ruggedised MPO Fan Outs, spanning MDA, HDA and EDA zones.

See PDF Download For More Information.

Learn More

MPO MicroCable Patch Assembly (Single Jacket 3mm OD).

MPO MicroCable Patch assemblies facilitate rapid deployment of high density cabling in data centers or other high fiber density environments reducing network installation or reconfiguration time and cost. They are typically used for patching within MDA zone or interconnect MPO active equipment ports with backbone cabling.

See PDF Download For More Information.

Learn More

The MicroScanner2 Cable Verifier presents a revolutionary change in voice, data, and video cable testing. It starts by taking results from what was four different test modes and displaying them all at once - graphical wiremap, pair lengths, distance to fault, cable ID, and far end device. What's more, its integrated RJ11, RJ45, and coax test ports support virtually any type of low-voltage cable testing with no need for awkward adaptors. The end result is reduced test time and technician error. That makes high-quality installations more efficient than ever. Revolutionary Interface - Graphical wiremap, length, cable ID, and distance to fault displayed on one screen Multimedia Support - Tests all common media types including RJ11, RJ45, Coax, with no need for adaptors IntelliTone Toning - Locates virtually any cable or wire pair with IntelliTone digital an analogue toning VDV Service Detection - Verifies today's media services, including 10/100/1000 Ethernet, POTS and PoE Rugged Housing - Integrated rubber holster enhances grip and makes it durable enough for the toughest jobs Oversized Display - Large, backlit LCD makes results crystal clear whether in bright sunshine or in a dark closet Learn More

MPO LGX Cassette Module.

MPO LGX Cassette Modules provide secure transition between MPO and LC or SC discrete connectors. They are used to interconnect MPO backbones with LC or SC patching. This modular system allows for rapid deployment of high density data center infrastructure as well as improved troubleshooting and reconfiguration during moves, adds and changes. Cassettes can be mounted in 1U or 3U 19” multislot chassis. MPO Cassettes contain factory controlled and tested MPO to LC or SC fanouts to deliver optical performance and reliability. Low loss Premium MPO and LC or SC Premium versions are offered featuring low insertion loss for demanding power budget high speed networks.

See PDF Download For More Information.

Learn More

UltraSlim 144xFibres V-Panel 19" 1U 12xMPO To 144LC.

UltraSlim Panel is specially designed to accommodate high density cabling in high end data centre and telecommunication central office environment. The shallow profile of the UltraSlim Panel makes it suitable for low depth copper racking or telecommunications ODFs. Design accommodates extraction free shuttered LC QUAD adapters allowing for smooth patching and easy LC port access. V shape front and rear cable management facilitates provides a neat and tidy solution for managing incoming and exiting cables. Fixed panel offers both installation speed and cost effectiveness against typical high density modular system. Low loss Premium MPO and LC Premium versions are offered featuring significantly improved low insertion losses for demanding low power budget, high speed networks. 

See PDF Download For More Information.

Learn More