Search results for: '1.5m preterm media data cable tray x 3 male'

Planet 100Base-FX to 10/100Base-TX PoE Media Converter (SC,MM) - 2km (FTP-802) Learn More

White round cable clip, suits 3 to 5mm cable dia Learn More

VG320 Voice Gateway - Male RJ21 Leaded Pane Learn More

This 1U Pre-term Breakout Panel is designed to provide housing for connections from a preterm to patch cords. The open frame allows for quick and easy installation of connectors. Having the option to use an array of different adapter types by using a different front plate makes this panel suitable for a wide range of applications. A key feature of the panel is that it provides space within the 1U space to route the patch cords through to the back of the rack.

Learn More

The MicroScanner2 Cable Verifier presents a revolutionary change in voice, data, and video cable testing. It starts by taking results from what was four different test modes and displaying them all at once - graphical wiremap, pair lengths, distance to fault, cable ID, and far end device. What's more, its integrated RJ11, RJ45, and coax test ports support virtually any type of low-voltage cable testing with no need for awkward adaptors. The end result is reduced test time and technician error. That makes high-quality installations more efficient than ever. Revolutionary Interface - Graphical wiremap, length, cable ID, and distance to fault displayed on one screen Multimedia Support - Tests all common media types including RJ11, RJ45, Coax, with no need for adaptors IntelliTone Toning - Locates virtually any cable or wire pair with IntelliTone digital an analogue toning VDV Service Detection - Verifies today's media services, including 10/100/1000 Ethernet, POTS and PoE Rugged Housing - Integrated rubber holster enhances grip and makes it durable enough for the toughest jobs Oversized Display - Large, backlit LCD makes results crystal clear whether in bright sunshine or in a dark closet Learn More

This 1U Pre-term Breakout Panel is designed to provide housing for connections from a preterm to patch cords. The open frame allows for quick and easy installation of connectors. Having the option to use an array of different adapter types by using a different front plate makes this panel suitable for a wide range of applications. A key feature of the panel is that it provides space within the 1U space to route the patch cords through to the back of the rack.

Learn More

The 6U HCF Splicing & Patch Frame is a high density rack mountable fiber management solution that splices and patches up to 864 fibers in a 6RU cabinet space. The 6U HCF has ribbon cabling splicing via a rear positioned hinge down panels that is supplied with a latching feature for both open and closed positions and shuttered Ultra High Density LC adapter modules on the front of the frame, allowing for smooth patching and easy LC port access.

Learn More

Blank plate for 3 and 4 compartment boxes Learn More

Euromod plate for 3 compartment box Learn More

RJ21 Telco - 24w RJ45 Leaded Panel can be used for Cisco VG224 Voice Gateway. The VG224 voice gateway will eventually be upgraded to the VG310 voice gateway by Cisco. Learn More

 

• RJ21 Cat3 Telco Male - Male
• UK manufactured and 100% tested
• Available with 90 degree, 120 degree and 180 degree hoods
• Other lengths can be manufactured to order

Learn More

OTDR Triple Cable Fibre Launch Box loaded with a choice of 3 fibre cables up to 2km each and a choice of connectors from C ,FC/APC, SC, SC/APC , ST & LC. Learn More

Ultra High Density Copper Module.

UHD (Ultra High Density) Copper Module compliments UHD system allowing for copper links to co-exist in common with fiber optics oriented high density management. Copper module if fully compatible with 0U, 1U and 2U UHD chassis system and 2U Patching frame accepting up to 5 modules in 1U and up to 12 x modules in 2U space. Standard module comes with 4 x Category 6A screened tool free RJ-45 keystone jacks for on-site cable termination. Module can be used as a platform to install factory made copper preterm assemblies.   

See PDF Download For More Information.

Learn More

MPO 24 Fiber Ferrule Cable Assembly.

MPO 24xFibers Ferrule Cable Assembly is a product designed for cable infrastructure which is used or which is due to be upgraded for parallel optics 40/100G protocols like 100GBASE-SR10 or 40GBASE-SR4. Assembly is built using 24xfibers ferrule interface MPO connectors which can be used directly with CFP/CXP 100G transceivers or when used together with Transition Modules/ Cables can provide 100G compatible infrastructure for 40G QSFP+ transceivers.

See PDF Download For More Information.

Learn More

•  PLEASE CALL FOR LENGTHS NOT SHOWN - WE CAN MANUFACTURE TO ANY LENGTH REQUIRED.

Cat6 UK Custom Made snagless booted LSZH ROLLOVER cable.

Learn More